Description
/**
*/
pragma solidity ^0.4.26;
/**
* WHAT IS SecurityFundToken? A tokenjar that holds erc20 and or Data as enabled
* SecurityFundToken is for general ethereum NFT token use; NFT Block Chain Token, URL link, Ethereum Interface,
* Data Rewrite possible, On Chain Data Storage, Transfer of Token, Erc20_Jar
*
* Pay to Recieve token Individual Token Optimization Security Useage
*
* Contract for SFT tokens
* How to Use:
* Send Ether to Contract Address Min amount 0.002 ETH
* Automatically recieve 1 SET Token to payee address, Inventory Number as next Minted
* Add Token Information with addTokenData function (with contract write)
* any Information / Data can be written to Chain
* Transfer via SafeTransfers (with contract write)
* Store Erc20 send and recieve the SecurityFundToken with Erc20s inside
*
* Similar Token 0xc9c77B0c2EE79CEc54B3aF7039f8a7bC684e48bD or 0x9cb151054ab13fa715F170c731A9705236e0a537
**/
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
// Gas optimization: this is cheaper than asserting 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b = a);
return c;
}
}
/**
* Utility library of inline functions on addresses
*/
library AddressUtils {
/**
* Returns whether the target address is a contract
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param addr address to check
* @return whether the target address is a contract
*/
function isContract(address addr) internal view returns (bool) {
uint256 size;
// XXX Currently there is no better way to check if there is a contract in an address
// than to check the size of the code at that address.
// See https://ethereum.stackexchange.com/a/14016/36603
// for more details about how this works.
// TODO Check this again before the Serenity release, because all addresses will be
// contracts then.
// solium-disable-next-line security/no-inline-assembly
assembly { size := extcodesize(addr) }
return size > 0;
}
}
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
contract ERC721Receiver {
/**
* @dev Magic value to be returned upon successful reception of an NFT
* Equals to `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`,
* which can be also obtained as `ERC721Receiver(0).onERC721Received.selector`
*/
bytes4 internal constant ERC721_RECEIVED = 0xf0b9e5ba;
/**
* @notice Handle the receipt of an NFT
* @dev The ERC721 smart contract calls this function on the recipient
* after a `safetransfer`. This function MAY throw to revert and reject the
* transfer. This function MUST use 50,000 gas or less. Return of other
* than the magic value MUST result in the transaction being reverted.
* Note: the contract address is always the message sender.
* @param _from The sending address
* @param _tokenId The NFT identifier which is being transfered
* @param _data Additional data with no specified format
* @return `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`
*/
function onERC721Received(address _from, uint256 _tokenId, bytes _data) public returns(bytes4);
}
/**
* @title ERC165
* @dev https://github.com/ethereum/EIPs/blob/master/EIPS/eip-165.md
*/
interface ERC165 {
/**
* @notice Query if a contract implements an interface
* @param _interfaceId The interface identifier, as specified in ERC-165
* @dev Interface identification is specified in ERC-165. This function
* uses less than 30,000 gas.
*/
function supportsInterface(bytes4 _interfaceId) external view returns (bool);
}
/**
* @title ERC721 Non-Fungible Token Standard basic interface
* @dev see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Basic is ERC165 {
event Transfer(address indexed _from, address indexed _to, uint256 indexed _tokenId);
event Approval(address indexed _owner, address indexed _approved, uint256 indexed _tokenId);
event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);
function balanceOf(address _owner) public view returns (uint256 _balance);
function ownerOf(uint256 _tokenId) public view returns (address _owner);
function exists(uint256 _tokenId) public view returns (bool _exists);
function approve(address _to, uint256 _tokenId) public;
function getApproved(uint256 _tokenId) public view returns (address _operator);
function setApprovalForAll(address _operator, bool _approved) public;
function isApprovedForAll(address _owner, address _operator) public view returns (bool);
function transferFrom(address _from, address _to, uint256 _tokenId) public;
function safeTransferFrom(address _from, address _to, uint256 _tokenId) public;
function safeTransferFrom(address _from, address _to, uint256 _tokenId, bytes _data) public;
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Enumerable is ERC721Basic {
function totalSupply() public view returns (uint256);
function tokenOfOwnerByIndex(address _owner, uint256 _index) public view returns (uint256 _tokenId);
function tokenByIndex(uint256 _index) public view returns (uint256);
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Metadata is ERC721Basic {
function name() external view returns (string _name);
function symbol() external view returns (string _symbol);
function tokenURI(uint256 _tokenId) public view returns (string);
}
/**
* @title ERC-721 Non-Fungible Token Standard, full implementation interface
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721 is ERC721Basic, ERC721Enumerable, ERC721Metadata {
}
contract ERC721Holder is ERC721Receiver {
function onERC721Received(address, uint256, bytes) public returns(bytes4) {
return ERC721_RECEIVED;
}
}
/**
* @title SupportsInterfaceWithLookup
* @author Matt Condon (@shrugs)
* @dev Implements ERC165 using a lookup table.
*/
contract SupportsInterfaceWithLookup is ERC165 {
bytes4 public constant InterfaceId_ERC165 = 0x01ffc9a7;
/**
* 0x01ffc9a7 ===
* bytes4(keccak256('supportsInterface(bytes4)'))
*/
/**
* @dev a mapping of interface id to whether or not it's supported
*/
mapping(bytes4 => bool) internal supportedInterfaces;
/**
* @dev A contract implementing SupportsInterfaceWithLookup
* implement ERC165 itself
*/
constructor() public {
_registerInterface(InterfaceId_ERC165);
}
/**
* @dev implement supportsInterface(bytes4) using a lookup table
*/
function supportsInterface(bytes4 _interfaceId) external view returns (bool) {
return supportedInterfaces[_interfaceId];
}
/**
* @dev private method for registering an interface
*/
function _registerInterface(bytes4 _interfaceId) internal {
require(_interfaceId != 0xffffffff);
supportedInterfaces[_interfaceId] = true;
}
}
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721BasicToken is SupportsInterfaceWithLookup, ERC721Basic {
bytes4 private constant InterfaceId_ERC721 = 0x80ac58cd;
/*
* 0x80ac58cd ===
* bytes4(keccak256('balanceOf(address)')) ^
* bytes4(keccak256('ownerOf(uint256)')) ^
* bytes4(keccak256('approve(address,uint256)')) ^
* bytes4(keccak256('getApproved(uint256)')) ^
* bytes4(keccak256('setApprovalForAll(address,bool)')) ^
* bytes4(keccak256('isApprovedForAll(address,address)')) ^
* bytes4(keccak256('transferFrom(address,address,uint256)')) ^
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) ^
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)'))
*/
bytes4 private constant InterfaceId_ERC721Exists = 0x4f558e79;
/*
* 0x4f558e79 ===
* bytes4(keccak256('exists(uint256)'))
*/
using SafeMath for uint256;
using AddressUtils for address;
// Equals to `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`
// which can be also obtained as `ERC721Receiver(0).onERC721Received.selector`
bytes4 constant ERC721_RECEIVED = 0xf0b9e5ba;
// Mapping from token ID to owner
mapping (uint256 => address) internal tokenOwner;
// Mapping from token ID to approved address
mapping (uint256 => address) internal tokenApprovals;
// Mapping from owner to number of owned token
mapping (address => uint256) internal ownedTokensCount;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) internal operatorApprovals;
/**
* @dev Guarantees msg.sender is owner of the given token
* @param _tokenId uint256 ID of the token to validate its ownership belongs to msg.sender
*/
modifier onlyOwnerOf(uint256 _tokenId) {
require(ownerOf(_tokenId) == msg.sender);
_;
}
/**
* @dev Checks msg.sender can transfer a token, by being owner, approved, or operator
* @param _tokenId uint256 ID of the token to validate
*/
modifier canTransfer(uint256 _tokenId) {
require(isApprovedOrOwner(msg.sender, _tokenId));
_;
}
constructor() public {
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(InterfaceId_ERC721);
_registerInterface(InterfaceId_ERC721Exists);
}
/**
* @dev Gets the balance of the specified address
* @param _owner address to query the balance of
* @return uint256 representing the amount owned by the passed address
*/
function balanceOf(address _owner) public view returns (uint256) {
require(_owner != address(0));
return ownedTokensCount[_owner];
}
/**
* @dev Gets the owner of the specified token ID
* @param _tokenId uint256 ID of the token to query the owner of
* @return owner address currently marked as the owner of the given token ID
*/
function ownerOf(uint256 _tokenId) public view returns (address) {
address owner = tokenOwner[_tokenId];
require(owner != address(0));
return owner;
}
/**
* @dev Returns whether the specified token exists
* @param _tokenId uint256 ID of the token to query the existence of
* @return whether the token exists
*/
function exists(uint256 _tokenId) public view returns (bool) {
address owner = tokenOwner[_tokenId];
return owner != address(0);
}
/**
* @dev Approves another address to transfer the given token ID
* @dev The zero address indicates there is no approved address.
* @dev There can only be one approved address per token at a given time.
* @dev Can only be called by the token owner or an approved operator.
* @param _to address to be approved for the given token ID
* @param _tokenId uint256 ID of the token to be approved
*/
function approve(address _to, uint256 _tokenId) public {
address owner = ownerOf(_tokenId);
require(_to != owner);
require(msg.sender == owner || isApprovedForAll(owner, msg.sender));
tokenApprovals[_tokenId] = _to;
emit Approval(owner, _to, _tokenId);
}
/**
* @dev Gets the approved address for a token ID, or zero if no address set
* @param _tokenId uint256 ID of the token to query the approval of
* @return address currently approved for the given token ID
*/
function getApproved(uint256 _tokenId) public view returns (address) {
return tokenApprovals[_tokenId];
}
/**
* @dev Sets or unsets the approval of a given operator
* @dev An operator is allowed to transfer all tokens of the sender on their behalf
* @param _to operator address to set the approval
* @param _approved representing the status of the approval to be set
*/
function setApprovalForAll(address _to, bool _approved) public {
require(_to != msg.sender);
operatorApprovals[msg.sender][_to] = _approved;
emit ApprovalForAll(msg.sender, _to, _approved);
}
/**
* @dev Tells whether an operator is approved by a given owner
* @param _owner owner address which you want to query the approval of
* @param _operator operator address which you want to query the approval of
* @return bool whether the given operator is approved by the given owner
*/
function isApprovedForAll(address _owner, address _operator) public view returns (bool) {
return operatorApprovals[_owner][_operator];
}
/**
* @dev Transfers the ownership of a given token ID to another address
* @dev Usage of this method is discouraged, use `safeTransferFrom` whenever possible
* @dev Requires the msg sender to be the owner, approved, or operator
* @param _from current owner of the token
* @param _to address to receive the ownership of the given token ID
* @param _tokenId uint256 ID of the token to be transferred
*/
function transferFrom(address _from, address _to, uint256 _tokenId) public canTransfer(_tokenId) {
require(_from != address(0));
require(_to != address(0));
clearApproval(_from, _tokenId);
removeTokenFrom(_from, _tokenId);
addTokenTo(_to, _tokenId);
emit Transfer(_from, _to, _tokenId);
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* @dev If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @dev Requires the msg sender to be the owner, approved, or operator
* @param _from current owner of the token
* @param _to address to receive the ownership of the given token ID
* @param _tokenId uint256 ID of the token to be transferred
*/
function safeTransferFrom(address _from, address _to, uint256 _tokenId) public canTransfer(_tokenId) {
// solium-disable-next-line arg-overflow
safeTransferFrom(_from, _to, _tokenId, "");
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* @dev If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @dev Requires the msg sender to be the owner, approved, or operator
* @param _from current owner of the token
* @param _to address to receive the ownership of the given token ID
* @param _tokenId uint256 ID of the token to be transferred
* @param _data bytes data to send along with a safe transfer check
*/
function safeTransferFrom(address _from, address _to, uint256 _tokenId, bytes _data) public canTransfer(_tokenId) {
transferFrom(_from, _to, _tokenId);
// solium-disable-next-line arg-overflow
require(checkAndCallSafeTransfer(_from, _to, _tokenId, _data));
}
/**
* @dev Returns whether the given spender can transfer a given token ID
* @param _spender address of the spender to query
* @param _tokenId uint256 ID of the token to be transferred
* @return bool whether the msg.sender is approved for the given token ID,
* is an operator of the owner, or is the owner of the token
*/
function isApprovedOrOwner(
address _spender,
uint256 _tokenId
)
internal
view
returns (bool)
{
address owner = ownerOf(_tokenId);
// Disable solium check because of
// https://github.com/duaraghav8/Solium/issues/175
// solium-disable-next-line operator-whitespace
return (
_spender == owner ||
getApproved(_tokenId) == _spender ||
isApprovedForAll(owner, _spender)
);
}
/**
* @dev Internal function to mint a new token
* @dev Reverts if the given token ID already exists
* @param _to The address that will own the minted token
* @param _tokenId uint256 ID of the token to be minted by the msg.sender
*/
function _mint(address _to, uint256 _tokenId) internal {
require(_to != address(0));
addTokenTo(_to, _tokenId);
emit Transfer(address(0), _to, _tokenId);
}
/**
* @dev Internal function to clear current approval of a given token ID
* @dev Reverts if the given address is not indeed the owner of the token
* @param _owner owner of the token
* @param _tokenId uint256 ID of the token to be transferred
*/
function clearApproval(address _owner, uint256 _tokenId) internal {
require(ownerOf(_tokenId) == _owner);
if (tokenApprovals[_tokenId] != address(0)) {
tokenApprovals[_tokenId] = address(0);
emit Approval(_owner, address(0), _tokenId);
}
}
/**
* @dev Internal function to add a token ID to the list of a given address
* @param _to address representing the new owner of the given token ID
* @param _tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function addTokenTo(address _to, uint256 _tokenId) internal {
require(tokenOwner[_tokenId] == address(0));
tokenOwner[_tokenId] = _to;
ownedTokensCount[_to] = ownedTokensCount[_to].add(1);
}
/**
* @dev Internal function to remove a token ID from the list of a given address
* @param _from address representing the previous owner of the given token ID
* @param _tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function removeTokenFrom(address _from, uint256 _tokenId) internal {
require(ownerOf(_tokenId) == _from);
ownedTokensCount[_from] = ownedTokensCount[_from].sub(1);
tokenOwner[_tokenId] = address(0);
}
/**
* @dev Internal function to invoke `onERC721Received` on a target address
* The call is not executed if the target address is not a contract
* @param _from address representing the previous owner of the given token ID
* @param _to target address that will receive the tokens
* @param _tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function checkAndCallSafeTransfer(
address _from,
address _to,
uint256 _tokenId,
bytes _data
)
internal
returns (bool)
{
if (!_to.isContract()) {
return true;
}
bytes4 retval = ERC721Receiver(_to).onERC721Received(
_from, _tokenId, _data);
return (retval == ERC721_RECEIVED);
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
address public pendingOwner;
address public manager;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Modifier throws if called by any account other than the manager.
*/
modifier onlyManager() {
require(msg.sender == manager);
_;
}
/**
* @dev Modifier throws if called by any account other than the pendingOwner.
*/
modifier onlyPendingOwner() {
require(msg.sender == pendingOwner);
_;
}
constructor() public {
owner = msg.sender;
}
/**
* @dev Allows the current owner to set the pendingOwner address.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
pendingOwner = newOwner;
}
/**
* @dev Allows the pendingOwner address to finalize the transfer.
*/
function claimOwnership() public onlyPendingOwner {
emit OwnershipTransferred(owner, pendingOwner);
owner = pendingOwner;
pendingOwner = address(0);
}
/**
* @dev Sets the manager address.
* @param _manager The manager address.
*/
function setManager(address _manager) public onlyOwner {
require(_manager != address(0));
manager = _manager;
}
}
/**
* @title Full ERC721 Token
* This implementation includes all the required and some optional functionality of the ERC721 standard
* Moreover, it includes approve all functionality using operator terminology
* @dev see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract SecurityFundToken is SupportsInterfaceWithLookup, ERC721, ERC721BasicToken, Ownable {
bytes4 private constant InterfaceId_ERC721Enumerable = 0x780e9d63;
/**
* 0x780e9d63 ===
* bytes4(keccak256('totalSupply()')) ^
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) ^
* bytes4(keccak256('tokenByIndex(uint256)'))
*/
bytes4 private constant InterfaceId_ERC721Metadata = 0x5b5e139f;
/**
* 0x5b5e139f ===
* bytes4(keccak256('name()')) ^
* bytes4(keccak256('symbol()')) ^
* bytes4(keccak256('tokenURI(uint256)'))
*/
// Token name
string public name_ = "SecurityFundToken";
// Token symbol
string public symbol_ = "SFT";
uint public tokenIDCount = 1;
// Mapping from owner to list of owned token IDs
mapping(address => uint256[]) internal ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) internal ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] internal allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) internal allTokensIndex;
// Optional mapping for token URIs
mapping(uint256 => string) internal tokenURIs;
// mapping from ERC20 => token id => ERC20 tokens amount
mapping(address => mapping(uint => uint)) public ERC20Balances;
mapping(uint => address[]) public ERC20ListByTokenId;
struct Data{
string information;
string URL;
}
mapping(uint256 => Data) internal tokenData;
/**
* @dev Constructor function
*/
constructor() public {
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(InterfaceId_ERC721Enumerable);
_registerInterface(InterfaceId_ERC721Metadata);
}
/**
* @dev External function to mint a new token
* @dev Reverts if the given token ID already exists
* @param _to address the beneficiary that will own the minted token
*/
function mint(address _to) external onlyManager {
_mint(_to, tokenIDCount++);
}
/**
* @dev Gets the token name
* @return string representing the token name
*/
function name() external view returns (string) {
return name_;
}
/**
* @dev Gets the token symbol
* @return string representing the token symbol
*/
function symbol() external view returns (string) {
return symbol_;
}
function arrayOfTokensByAddress(address _holder) public view returns(uint256[]) {
return ownedTokens[_holder];
}
/**
* @dev Returns an URI for a given token ID
* @dev Throws if the token ID does not exist. May return an empty string.
* @param _tokenId uint256 ID of the token to query
*/
function tokenURI(uint256 _tokenId) public view returns (string) {
require(exists(_tokenId));
return tokenURIs[_tokenId];
}
/**
* @dev Gets the token ID at a given index of the tokens list of the requested owner
* @param _owner address owning the tokens list to be accessed
* @param _index uint256 representing the index to be accessed of the requested tokens list
* @return uint256 token ID at the given index of the tokens list owned by the requested address
*/
function tokenOfOwnerByIndex(address _owner, uint256 _index) public view returns (uint256) {
require(_index < balanceOf(_owner));
return ownedTokens[_owner][_index];
}
/**
* @dev Gets the total amount of tokens stored by the contract
* @return uint256 representing the total amount of tokens
*/
function totalSupply() public view returns (uint256) {
return allTokens.length;
}
/**
* @dev Gets the token ID at a given index of all the tokens in this contract
* @dev Reverts if the index is greater or equal to the total number of tokens
* @param _index uint256 representing the index to be accessed of the tokens list
* @return uint256 token ID at the given index of the tokens list
*/
function tokenByIndex(uint256 _index) public view returns (uint256) {
require(_index < totalSupply());
return allTokens[_index];
}
/**
* @dev Internal function to set the token URI for a given token
* @dev Reverts if the token ID does not exist
* @param _tokenId uint256 ID of the token to set its URI
* @param _uri string URI to assign
*/
function _setTokenURI(uint256 _tokenId, string _uri) internal {
require(exists(_tokenId));
tokenURIs[_tokenId] = _uri;
}
/**
* @dev Internal function to add a token ID to the list of a given address
* @param _to address representing the new owner of the given token ID
* @param _tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function addTokenTo(address _to, uint256 _tokenId) internal {
super.addTokenTo(_to, _tokenId);
uint256 length = ownedTokens[_to].length;
ownedTokens[_to].push(_tokenId);
ownedTokensIndex[_tokenId] = length;
}
/**
* @dev Internal function to remove a token ID from the list of a given address
* @param _from address representing the previous owner of the given token ID
* @param _tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function removeTokenFrom(address _from, uint256 _tokenId) internal {
super.removeTokenFrom(_from, _tokenId);
uint256 tokenIndex = ownedTokensIndex[_tokenId];
uint256 lastTokenIndex = ownedTokens[_from].length.sub(1);
uint256 lastToken = ownedTokens[_from][lastTokenIndex];
ownedTokens[_from][tokenIndex] = lastToken;
ownedTokens[_from][lastTokenIndex] = 0;
// Note that this will handle single-element arrays. In that case, both tokenIndex and lastTokenIndex are
// going to be zero. Then we can make sure that we will remove _tokenId from the ownedTokens list since we are
// first swapping the lastToken to the first position, and then dropping the element placed in the last
// position of the list
ownedTokens[_from].length--;
ownedTokensIndex[_tokenId] = 0;
ownedTokensIndex[lastToken] = tokenIndex;
}
/**
* @dev Internal function to mint a new token
* @dev Reverts if the given token ID already exists
* @param _to address the beneficiary that will own the minted token
*/
function _mint(address _to, uint256 _id) internal {
allTokens.push(_id);
allTokensIndex[_id] = _id;
super._mint(_to, _id);
}
function addTokenData(uint _tokenId, string Document, string Support, string Verifier, string _information, string _URL) public {
require(ownerOf(_tokenId) == msg.sender);
tokenData[_tokenId].information = _information;
Document = tokenData[_tokenId].information;
Support = tokenData[_tokenId].information;
Verifier = tokenData[_tokenId].information;
tokenData[_tokenId].URL = _URL;
}
function getTokenData(uint _tokenId) public view returns(string Support, string Verifier, string URL,string _information){
require(exists(_tokenId));
_information = tokenData[_tokenId].information;
Support = tokenData[_tokenId].information;
Verifier = tokenData[_tokenId].information;
URL = tokenData[_tokenId].URL;
}
function() payable{
require(msg.value > 0.002 ether);
_mint(msg.sender, tokenIDCount++);
}
function withdraw() public onlyManager{
require(0.25 ether > 0);
manager.transfer(0.25 ether);
}
event ERC20Deposited(
uint tokenId,
uint tokenAmount,
address erc20Address,
address depositor
);
function depositERC20(
uint _tokenId,
address _erc20Address,
uint _tokenAmount
)
public {
(
bool success
) = _erc20Address.call(
abi.encodeWithSignature
(
"transferFrom(address,address,uint256)",
msg.sender,
address(this),
_tokenAmount
)
);
require(
success,
"TranfserFrom was not successfull"
);
ERC20Balances[_erc20Address][_tokenId] =
ERC20Balances[_erc20Address][_tokenId] + _tokenAmount;
bool exists = ERC20AddressExists(
ERC20ListByTokenId[_tokenId],
_erc20Address
);
if (!exists) {
addERC20AddressToList(
ERC20ListByTokenId[_tokenId],
_erc20Address
);
}
emit ERC20Deposited(
_tokenId,
_tokenAmount,
_erc20Address,
msg.sender
);
}
event ERC20Redeemed(
uint tokenId,
uint tokenAmount,
address erc20Address,
address recevingAddress
);
function redeemERC20(
uint _tokenId,
address _erc20Address,
uint _tokenAmount,
address _recevingAddress
)
public {
require(
tokenOwner[_tokenId] == msg.sender,
"msg.sender is not the owner of token"
);
require(
ERC20Balances[_erc20Address][_tokenId] >= _tokenAmount,
"Not enough ERC20 balance against the token id"
);
ERC20Balances[_erc20Address][_tokenId] =
ERC20Balances[_erc20Address][_tokenId] - _tokenAmount;
if (ERC20Balances[_erc20Address][_tokenId] == 0) {
removeERC20AddressFromList(
ERC20ListByTokenId[_tokenId],
_erc20Address
);
}
(
bool success
) = _erc20Address.call(
abi.encodeWithSignature
(
"transfer(address,uint256)",
_recevingAddress,
_tokenAmount
)
);
require(success, "Transfer of ERC20 was not successfull");
emit ERC20Redeemed(
_tokenId,
_tokenAmount,
_erc20Address,
_recevingAddress
);
}
event ERC20Transferred(
uint tokenAmount,
address erc20Address,
uint fromTokenId,
uint toTokenId
);
function transferERC20(
uint _tokenId,
uint _tokenAmount,
address _erc20Address,
uint _receivingTokenId
) public {
require(
tokenOwner[_tokenId] == msg.sender,
"msg.sender is not the owner of the token"
);
require(
tokenOwner[_receivingTokenId] != address(0x0),
"the receving token does not exist"
);
ERC20Balances[_erc20Address][_tokenId] =
ERC20Balances[_erc20Address][_tokenId] - _tokenAmount;
ERC20Balances[_erc20Address][_receivingTokenId] =
ERC20Balances[_erc20Address][_receivingTokenId] + _tokenAmount;
if (ERC20Balances[_erc20Address][_tokenId] == 0) {
removeERC20AddressFromList(
ERC20ListByTokenId[_tokenId],
_erc20Address
);
}
bool exists = ERC20AddressExists(
ERC20ListByTokenId[_receivingTokenId],
_erc20Address
);
if (!exists) {
addERC20AddressToList(
ERC20ListByTokenId[_receivingTokenId],
_erc20Address
);
}
emit ERC20Transferred(
_tokenAmount,
_erc20Address,
_tokenId,
_receivingTokenId
);
}
function getERC20Balance(
address _erc20Token,
uint _tokenId
)
public
view
returns (
uint256 balance
) {
balance = ERC20Balances[
_erc20Token
]
[
_tokenId
];
}
function getTokenDataByOwner(
uint _tokenId
)
public
view
onlyOwner
returns(string document)
{
require(exists(_tokenId));
document = tokenData[_tokenId].information;
}
function getERC20AddressesByTokenId(uint _tokenId)
public
view
returns (
address[] memory listOfTokenAddresses
)
{
listOfTokenAddresses = new address[](ERC20ListByTokenId[_tokenId].length);
listOfTokenAddresses = ERC20ListByTokenId[_tokenId];
}
function removeERC20AddressFromList(
address[] storage _list,
address _addr
)
private
{
for (uint i = 0; i < _list.length; i++) {
if (_list[i] == _addr) {
_list[i] = _list[_list.length - 1];
delete _list[_list.length - 1];
_list.length--;
}
}
}
function addERC20AddressToList(
address[] storage _list,
address _addr
)
private
{
_list.push(_addr);
}
function ERC20AddressExists(
address[] _list,
address _addr
)
private
pure
returns (bool) {
bool found;
for (uint i = 0; i < _list.length; i++) {
if (_list[i] == _addr) {
found = true;
break;
}
}
return found;
}
}
